JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
SilverSense SDF™ 38% silver diamine fluoride, is a solution that eliminates sensitivity, stops harmful bacterial formation, and helps you deliver better care to your patients!
FluoroDose Award-Winning FluoroDose Fluoride Varnish is now in a sleek, enclosed LolliTray™ with a patented ergonomic design and smooth, easy peel!
Champ is a light-activated, pit and fissure sealant, now available in a XX mL syringe.
Tempit-E Temporary Filling and Sealing Material. High-quality Tempit PLUS the added benefit of eugenol in a ready-to-use, single patient tip. Tempit-E’s palliative eugenol formulation gives it a sedative quality which calms hypersensitive pulp. The anti-inflammatory and local anesthetic effects help facilitate pulpal healing.
NoCord VPS Centrix's NoCord™ VPS System impression material is an all-in-one system that retracts the gingiva, controls bleeding and takes a clear final impression. It is designed specifically for the wash and tray technique and it eliminates the time and costs of packaging cord (or clay) and applying hemostatic agents.
GripStrip – Medium Mini GripStrip Proximal Finishing and Polishing Strips have a diamond-coated design to provide precision finishing and polishing for restorations in proximal areas. Because our strips contain two working areas of different grit sizes – a coarser grit for stripping and removing material, and a finer grit for polishing – you can finish and polish with only one strip.
NoMIX Temporary Cement Take-home Applicators NoMIX Temporary Cement is a moisture-activated, non-eugenol, temporary, white cement designed for short-term cementation of crowns and bridges. It is fully compatible with all acrylics, composites, ceramics and metals. NoMix is a single component cement that requires no mixing, no spatulation, no mess, no waste. It expands slightly upon setting for a tight seal.
GripStrip - Fine & Coarse GripStrip Proximal Finishing and Polishing Strips have a diamond-coated design to provide precision finishing and polishing for restorations in proximal areas. Because our strips contain two working areas of different grit sizes – a coarser grit for stripping and removing material, and a finer grit for polishing – you can finish and polish with only one strip.
AccessFLO Access Flo is a clay-based gingival retraction paste for use prior to all crown & bridge impression procedures. Packaged in single-use Centrix syringe tips, Access Flo saves time while eliminating cross-contamination.
Access Edge Access Edge is a clay-based gingival retraction paste that displaces and retracts tissue. Packaged in a convenient unit-dose syringe tip, Access Edge will save you time, steps and money. Our leur-lock tip design ensures that this tip will stay secure.
GripStrip - Medium Use GripStrip to contour and bevel, or to remove excess material and overhangs in filling surfaces and crown borders. Strong yet flexible, GripStrip reaches curved surfaces without breaking. A "free middle zone," which is uncoated and contains no grit, helps you get between spaces to your designated contact point on the restoration.
Mark II Snap-Fit Provides better visibility for dispensing unit-dose flowable composite while gripping any tube and locking into any position. Starter kit contents listed above.
Champ Champ is a light-activated, pit and fissure sealant, packaged in our patented, single-use LolliPack® package. Each unit contains one single .25ml dose of Champ plus one clean Benda®Brush. Everything you need in one simple package!
GingiTrac MiniMix More patient-friendly, the MiniMix is easier to express than the automix gun with less waste. Plus, the smaller size and ease of use will save valuable chair time and reduce patient stress.
Encore D/C MiniMix Our single-dose Encore D/C MiniMix kit contains 36 cartridges. Each cartridge has two mixing nozzles and our exclusive needletip. Our product is dual-cure, for fast light-activation. Plus, the smaller size and ease of use will save you valuable chair time and reduce patient stress. Available with fluoride release and in natural and contrast shades.
FluoroDose FluoroDose features a 5% sodium fluoride, white cavity varnish in the single-use LolliPack® package, the maximum allowed fluoride dosage and is FDA-cleared for treating dentinal sensitivity. No more messy gels and uncomfortable trays; no more inherent worry of fluoride ingestion. Dip. Mix. Brush. Throw away. Centrix makes fluoride varnish safer and cleanup easier.*FluoroDose Caramel was introduced in 2015.
RapidCore MiniMix The first unit-dose, automix core buildup material with fluoride. This self-cure composite resin provides complete depth of cure, without light activation in only two minutes. Unit-dose dispensing provides for the fastest core buildup, without a heavy, clumsy automix syringe; and MiniMix technology virtually eliminates waste.
Snub Nose Syringe The same technology and design used in our Snap-Fit Syringe — just a shorter barrel.
Snap-Fit Syringe Snap-Fit improves placement of materials by locking any tube into any position. Tubes "snap" in without a plunger, and once material is placed, empty tubes "snap" out.
Exposé Exposé is a caries indicator built into an applicator and dispensing system! The detector solution is pre-applied to our Benda® Micro applicators. Apply Exposé simply by touching a wet tooth surface, and Exposé stains infected dentin. No dispensing, no dripping, no mess! Exposé eliminates the dreaded mess of bulk containers or brush-tipped syringes. At Centrix we make dentistry easier.
RapidCore It's easy. Simply inject RapidCore through the exclusive mixing nozzle needletip and you are ready to cut the prep in two minutes. Achieve high bond strengths when used with a compatible bonding agent. RapidCore's advanced thixotropic formula flows smoothly through the needle yet will not slump, making core forms and matrix bands unnecessary.
LubeCube Put an end to composite stickiness, pull-back and unnecessary voids. With LubeCube, simply peel off the adhesive back, stick it to a surface and slide your instrument tip through the slit. The cleaning and lubricating action will allow you to shape with ease. At Centrix, we make dentistry easier.
GingiTrac Retraction System Still simply syringe the retraction paste into the sulcus with our patented NeedleTip™, and apply bite pressure with a GingiCap. Working time 1:30. GingiTrac's built-in astringent controls oozing, while the flow-able Vinyl Polysiloxane material gently pushes the gingiva.
NoMIX Temporary Cement NoMIX Temporary Cement is a moisture-activated, non-eugenol, temporary, white cement designed for short-term cementation of crowns and bridges. It is fully compatible with all acrylics, composites, ceramics and metals. NoMix is a single component cement that requires no mixing, no spatulation, no mess, no waste. It expands slightly upon setting for a tight seal.
D/Sense Crystal D/Sense Crystal is a one-step, dual-action gel desensitizer and cavity liner. It reacts with dentin to precipitate microcrystals of calcium oxalate and potassium nitrate. These crystals penetrate deeply into the tubules and seal the dentinal surface with a continuous, acid-resistant complex (typically less than 3 microns thick).
Supercure Build a high-strength core faster with SuperCure. Inject direct from pre-filled syringe tip to mouth. Light activate to a dentin-like hardness. Just place a tip of SuperCure light-activated core buildup material in your Centrix syringe and inject. There's no mixing, no wasteful automix nozzles, and no cross-contamination. Stacks beautifully, without slump, so matrices are not required.
Access Crown Sets to an elastic-like state, ready for removal from the mouth in just one minute. The primary clinical advantage of this bis-acryl composite is its elastic behavior during polymerization. This memory will allow you to pull it from undercuts or non-parallel tooth preparations and return it to its original form.
LolliCaine LolliCaine topical anesthetic features a 20% benzocaine gel in the single-use LolliPack® package. Each unit contains one single dose (0.3ml) of LolliCaine gel plus one clean swab applicator. Simply peel back the cover, dip in the swab applicator and apply.
Encore Encore is a self-cure composite core buildup material that mixes easily and syringes through a NeedleTube®. Available with or without fluoride in natural and white shades.
AccuDose Syringe all types of composites, cements, glass ionomers, impression materials and other flowable products. Choose according to need or specific application.
Benda Brush Benda Brushes are the original bendable bristle brush applicators. They have chemical-resistant fibers that hold up to the harshest dental materials. The bristle brush allows for greater carrying capacity and better smoothing and spreading action. Select from our single-ended or "snap apart" TWIN styles. Commonly used with whitening agents, etchants, bonding agents, sealants, desensitizers, adhesives and resins.
NeedleTube® A tip with a 19ga or 20ga bendable blunt needle, for the most precise placement of materials such as cements, base materials, core buildup materials and any other gel type materials. Especially useful for injecting materials into postholes and deep proximal boxes. The PhotoBloc™ orange color extends the working time of light activated materials.
Mark IIIP The original gun design with speed-slot loading. The Mark IIIp syringe is the ideal syringe for all viscosity materials.
Tempit Many different types of restorations are prepared throughout the day, each based on its unique requirements. That's why we designed the Tempit family to have a perfect material for each clinical application. And every Tempit product is packaged in pre-filled, unit dose tips so it can be delivered directly, and precisely, to the prep. Using our Snap-Fit CR gun (or any composite tip gun), you just snap in the right tip and apply. No more mixing, no spatulation, no messy placement - just perfect delivery every time.
Mark II Syringe Provides better visibility for dispensing unit-dose flowable composite while gripping any tube and locking into any position. Starter kit contents listed above.
Tubes and Plugs Depending on the type of material and application there is an AccuDose® tube and plug available. Syringe all types of composites, cements, glass ionomers, impression materials and other flowable products. Choose according to need or specific application.
Mark I Syringe The original C-R-Syringe with stainless-steel barrel. The perfect syringe for low to medium viscosity materials. Starter kit contents listed above.