Access® Putty

Vinyl Polysiloxane (VPS) for All Impression Techniques

$139.99

In stock

REF

360015

Accurate, dimensionally stable impressions are the critical requirement for well-fitting restorations. That’s why Centrix Access Impression materials feature no-compromise, VPS formulas that ensure you of successful results, time after time. Trust Access Impression materials to deliver exacting performance in all crown and bridge cases

Access PUTTY® is the ideal tray material for the 2-step putty and wash technique, in combination with Access Gold. Non-oily and easy to mix, Access Putty may be used with any brand of rigid metal or plastic impression tray.

Contains: 2 x 280 mL jars

Access Impression Materials Setting Times

Product	Putty
Viscosity	Putty
Technique	Tray
Mixing Time	:30
Working Time	2:00
Intraoral Time	1:45
Total Set Time	4:15

Education

On Demand CE Webinar: The Role of the Dental Assistant – Techniques and Technologies that Help Deliver “World Class” Dentistry

FAQs

Can I use Access Blue in a tray with a wash?

Yes. You can use Access Blue in a tray with a wash. A wash in this case is a low viscosity VPS material like Access Gold.

How many impressions will I get from Access Putty?

If you are making 3 unit impressions, expect to get 50 to 75 from one finished goods. (2-3 finger full worth of materials each)
If you are making full mouth impressions, expect to get 25 from one finished goods. (full scoops each)
The scoops VERY generously use the materials, and would be overkill for a 3 unit impression.

What are the specifications for the mixing nozzles?

The Access VPS impression materials uses 1:1 automix nozzles. The internal diameter is 6.5mm; it has 11 elements; and a straight end. The hub is green (also called teal) and the mixing element is natural or clear.

When would using Putty cause distortions in Impressions?

A distortion can take place in a Putty/Wash impression technique when the user takes the putty impression PRIOR to placing the Access Gold or similar wash VPS material. The removal of the set Putty causes the distortion, which may be called out by the lab. It is better to place both materials at the same time, which is technique sensitive. Or change to a Heavy/Wash technique, using Access Gold for the Wash and Access Purple, Heavy or Monophase for the Heavy VPS material.

Are the VPS materials radiopaque?

No, they all are radiolucent.

How-To's

NOTE: The adhesive does not always secure sufficient adhesion to trays made of other plastic materials or individual trays made of base plates. A polyether adhesive must be used for polyether impression materials.

Instructions for Use:

1: Apply a thin layer of Access® Tray Adhesive to the tray using the applicator brush.

2: Allow to dry for at least 3 minutes.

3: Load the tray with impression material and take the impression.

ACCESS VPS HOW-TO:

ACCESS IMPRESSION MATERIALS (VPS - VINYL POLYSILOXANE)

Access Impression Materials are addition reaction silicones which offer excellent physical and dimensional properties. Highly accurate and stable, Access impressions may be poured immediately or up to two (2) weeks after the impression is made. The material is odorless and tasteless, and may be soaked in common disinfecting solutions without distortion. Special hydrophilic surfactants have been added to Access Impression Materials to allow them to be highly wet table in a moist environment. Any of the viscosities will chemically adhere to another viscosity, permitting a wide range of possible techniques.

APPLICATION

Note: For faster procedures, it is advisable to use two (2) mixing dispensers.

Always apply a thin layer of Access Impression Material Tray Adhesive to a clean, dry impression tray. Allow to air dry for five (5) minutes before using. Contact with latex gloves, hemostatic agents, hand lotions, eugenol or sulphur compounds may interfere with the setting properties of Access Impression Materials.

TRAY / SYRINGE TECHNIQUE:

Express Access Impression Material into a prepared tray, pre-coated with adhesive. Access Heavy, Access Monophase or Access Purple may be selected, depending on the application.
Inject Access Gold low-viscosity or Access Monophase directly into a clean, dry, retracted sulcus preparation, using an Access intra oral needle tip (REF 290017).
Seat the loaded tray into the mouth — allow to remain stable until set.

PUTTY / WASH TECHNIQUE: ONE STEP

Note: Do not mix putty with latex gloved hands!

Remove equal amounts of Base and Catalyst from the jars using the supplied color coded scoops.
Mix by kneading together for 30 seconds until no streaks are visible.
Shape to fit into the desired tray, which has been pre-treated with adhesive.
Place Access Gold low viscosity into an automix syringe and inject directly into a clean, dry, retracted sulcus preparation, using an Access intra oral needle tip (REF 290017).
Seat the loaded tray into the mouth; allow to remain stable until set.

PUTTY / WASH TECHNIQUE: TWO STEPS

Note: Do not mix putty with latex gloved hands!

Remove equal amounts of Base and Catalyst from the jars using the supplied color code scoops.
Mix by kneading together for 30 seconds until no streaks are visible.
Shape to fit into the desired tray, which has been pre-treated with adhesive.
Place loaded tray in patients' mouth - allow to remain stable until set.
With a surgical rongeurs or coarse grit acrylic bur, remove all interdental flash and/or undercuts. Relieve area to be prepared.
Place Access Gold low viscosity impression material in an automix syringe and inject directly into a clean, dry, retracted sulcus preparation using an Access intra oral needle tip (REF 290017).
Seat the loaded tray into the mouth — allow to remain stable until set.

Working Times

Access Gold

Viscosity: Low
Technique: Syringe Injection
Mixing Time: Auto
Working Time: 1':30"
Setting Time in mouth: 2':00"
Total Setting time: 4':15"

Access Monophase

Viscosity: Medium
Technique: One Step
Mixing Time: Auto
Working Time: 2':00"
Setting Time in mouth: 2':00"
Total Setting time: 4':15"

Access Heavy

Viscosity: High
Technique: Tray
Mixing Time: Auto
Working Time: 2':00"
Setting Time in mouth: 2':00"
Total Setting time: 4':15"

Access Blue

Viscosity: Fast Bite
Technique: Bite Registration
Mixing Time: Auto
Working Time: 0':30"
Setting Time in mouth:1':00"
Total Setting Time: 1':30"

Access Putty

Viscosity: Putty
Technique: Tray
Mixing Time: 0':30"
Working Time: 2':00"
Setting Time in mouth:1':45"
Total Setting Time: 4':15"

Product Info