Encore AF is a smoother, creamier version of our Encore self-cure composite core buildup material. The improved blend of hybrid glass filler syringes easier and features an increased mechanical strength. Available with fluoride and in natural and white shades.

• Designed to flow though a NeedleTube
• Non slumping formula so there is no need to use a matrix
• Cuts like dentin to reduce ditching
• Increased compressive, flexural and tensile strengths
• Available in two shades – natural and white
• Radiopaque
• 50 gram kit
  
  Features
  Compressive strength.......................298.0 Mpa
  Flexural strength..................................149.2 Mpa
  Diametral tensile strength...................47.0 Mpa

7-STEP GUIDE TO BUILDING A VOID-FREE, BONDED, COMPOSITE POST & CORE WITH ENCORE AND ENCORE AF

1) Enlarge root canal to accept NeedleTube. Bevel the edges to eliminate sharp angles. 2) Etch the post hole, rinse thoroughly and dry. 3) Apply bonding agent according to manufacturers instructions. 4) Mix Encore / Encore AF. Backload into a NeedleTube until 1/2 full. Insert plug.

5) Load NeedleTube into syringe and bend needle as required. Insert NeedleTube to the bottom of the post hole and inject material with slow gradual pressure. 6) Continue filling by injecting and slowly withdrawing the needle. 7) Allow Encore / Encore AF to cure and then cut and shape the core. The result is a solid, securely bonded post and core.

Encore D/C is a dual-cure composite core buildup material in an automix cartridge. Available with fluoride release and in natural and contrast shades.

Product Literature... Click Here

• Automix and dual-cure formula speeds procedure and insures depth of cure
• Light-activate for 20 seconds to accelerate the set
• Needle tip allows delivery of material to bottom of a post hole
• Non-slumping formula so there is no need to use a matrix
• Cuts like dentin to reduce ditching
• Available in two shades – natural and contrast
• Radiopaque
  
  Features
  Compressive strength.................................222.35 Mpa
  Flexural strength.................................................110 Mpa
  Diametral tensile strength...............................48.5 Mpa
  Light activated
    depth of cure....................................40 seconds, 2mm

RapidCore makes depth of cure fast and worry-free.
It’s easy. Simply inject RapidCore through the exclusive mixing nozzle needletip and you are ready to cut the prep in two minutes. Achieve high bond strengths when used with a compatible bonding agent such as Adhere™. RapidCore’s advanced thixotropic formula flows smoothly through the needle yet will not slump, making core forms and matrix bands unnecessary.

Product Literature... Click Here

• Two-minute set time reduces chair time by 50%
• Pure self cure — no depth of cure concerns
• Needle tip allows delivery of material to bottom of a post hole
• Non-slumping formula so there is no need to use a matrix
• Cuts like dentin to reduce ditching
• Available in three shades – natural, contrast and white
• Radiopaque
  

6-STEP GUIDE TO BUILDING A VOID-FREE,
BONDED, COMPOSITE POST & CORE

All prices are MSRP (Manufacturer's Suggested Retail Price)

Build a high-strength core faster with SuperCure. Inject direct from pre-filled syringe tip to mouth. Light activate to a dentin-like hardness. Just place a tip of SuperCure light-activated core buildup material in your Centrix syringe and inject. There’s no mixing, no wasteful automix nozzles, and no cross-contamination. Stacks beautifully, without slump, so matrices are not required.

The translucent color of SuperCure deep cures with any light source, eliminating the need to wait 5 minutes before you prep. Compatible with all light-activated dentin bonding agents. You’ll get a high strength, securely bonded core buildup in a fraction of the time! There are three versions for you to choose from.

Product Literature... Click Here

Original Supercure®
Syringes easily and stays where placed without slump. Cures fast and deep. The barium borosilicate glass filler cuts easily, letting you prep the core with less stress and heat buildup. With a hardness similar to dentin, SuperCure is the original easy-to-use, high-strength core buildup material for all crown and bridge buildups.

SuperCure®-Q
SuperCure formula with a percentage of hard quartz glass filler. SuperCure-Q preps noticeably harder than the original, to reduce the chance of ditching in critical areas. You’ll get the same deep curing, high strength buildup as our original formula, in a new, harder cutting version.

Order Information

Guaranteed to produce high-strength adhesion when used with SuperCure®,
RapidCore™, Encore® or Encore D/C. Adhere bonds all types of resins to tooth
structure with a simple, total-etch technique.

Adhere is designed specifically to give you high adhesion* when used with any
of Centrix’ composite core buildup materials. And, it is compatible with other
resin materials, such as flowable composites, hybrid composites, or resin cements.

No matter what type of curing is required, the 2-bottle Adhere bonding system
is the technique-simple bonding agent that guarantees you reliable results!
After etching with Onyx™ phosphoric acid, simply apply two generous coats of
Adhere adhesive to dentin and enamel surfaces. (If you are using a self-cure or
dual-cure material, mix a drop of self-cure activator into two drops of the adhesive).
And apply your core buildup material.

Product Literature... Click Here

Introducing the LubeCube. Clean and lubricate your sculpting instrument by simply running it through the slit on top.
Put an end to composite stickiness, pull-back and unnecessary voids. With LubeCube, simply peel off the adhesive back, stick it to a surface and slide your instrument tip through the slit. The cleaning and lubricating action will allow you to shape with ease. At Centrix, we make dentistry easier

Product Literature... Click Here

• Cleans, conditions and lubricates instruments with an unfilled,
  light-activated, Bis-GMA/UDMA resin monomer
• Lubricant is compatible with all light-activated and dual-cure
  composites. No alcohol, no solvents.
• Self-adhesive back allows placement anywhere that is convenient
• No-drip dispensing of lubricant micro-coats each instrument
• Sculpt composites faster and easier, with less “pull-back”
• Makes any composite instrument “non-stick”
• Opaque foam cube keeps resin lubricant from polymerizing
• Low cost, single use and disposable
• Smoother, less porous composite surfaces (see illustration on reverse side)
  

INSTRUCTIONS FOR USE
1. Grab the tab and peel backing off bottom of LubeCube.	2. Place LubeCube in desired location (back of hand, bib, tray, etc).	3. Insert tip of composite instrument into slit of LubeCube. Glide tip of composite instrument back and forth in slit to clean and lubricate.	4. Remove composite instrument and begin sculpting the restoration. Repeat steps 1 thru 4 as desired until restoration is complete. Dispose of used LubeCube.